EONN PLAST INDIA PVT. LTD.

EONN PP-R Triple Layer Piping System

PPR

HDPE

Quality

Benefits

Widest Range

PP-R Material

Features

Use It

Save Lakhs

Products Detail

Comparison

Dimension Detail

PRODUCT DETAIL

	Socket is available in size 20,25, 32, 40, 50, 63, 75, 90, 110, 160 mm
	Elbow is available in size 20, 25, 32, 40, 50, 63, 75, 90, 110, 160 mm
	Tee is available in size 20,25, 32, 40, 50, 63, 75, 90, 110, 160 mm
	End Cap is available in size 20, 25, 32, 40, 50, 63, 75, 90, 110, 160 mm
	Cross Tee is available in size 20, 25, 32 mm
	Wall Clamp is available in size 20, 25, 32, 40 mm
	Integral Flange is available in size 20, , 25, 32, 40, 50, 63, 75, 90, 110, 160 mm
	Union is available in size 20, , 25, 32, 40, 50, 63, 75, 90, 110, 160 mm
	Plastic Ball Valve is available in size 20, 25, 32, 40 mm
	Tank Connector is available in size 20, 25, 32, 40, 50mm

REDUCERS

	Reducing Socket is available in size 25x20, 32x25, 32x20, 40x32, 40x25, 40x20, 50x40, 50x32, 50x25, 50x20, 63x50, 63x40, 63x32, 63x25, 63x20, 75x63, 75x50, 75x40, 90x75, 90x63, 90x50, 110x90, 110x75, 110x63, 160x110, 160x90 mm
	Reducing Tee is available in size 25x20, 32x25, 32x20, 40x32, 40x25, 40x20, 50x40, 50x32, 50x25, 50x20, 63x50, 63x40, 63x32, 63x25, 63x20 mm
	Reducing Elbow is available in size 25x20, 32x25, 32x20, 40x32 mm
THREADED FITTINGS
	Female Socket is available in size 20x½”, 20x¾”, 25x½”, 25x¾”, 25x1”, 32x½”, 32x¾”, 32x1”, 32x1¼”, 40x1”, 40x1¼”, 40x1½”, 50x1½”, 50x2”, 63x2”, 75x2½”, 90x3”, 110x4”
	Male Socket is available in size 20x½”, 20x¾”, 25x½”, 25x¾”, 25x1”, 32x½”, 32x¾”, 32x1”, 32x1¼”, 40x1”, 40x1¼”, 40x1½”, 50x1½”, 50x2”, 63x2”, 75x2½”, 90x3”, 110x4”
	Female Elbow is available in size 20x½”, 20x¾”, 25x½”, 25x¾”, 32x½”, 32x¾”, 32x1”, 40x1¼”
	Male Elbow is available in size 20x½”, 20x¾”, 25x½”, 25x¾”, 32x½”, 32x¾”, 32x1”, 40x1¼”
	Female Tee is available in size 20x½”, 20x¾”, 25x½”, 25x¾”, 32x½”, 32x¾”, 32x1”, 40x1¼”
	Male Tee is available in size 20x½”, 20x¾”, 25x½”, 25x¾”, 32x½”, 32x¾”, 32x1”, 40x1¼”

	Plug is available in size ½”
	Long Plug with ‘O’ Ring is available in size ½”

	Cutter
	Welding Device
	Die Set

Top

COMPARISON BETWEEN DIFFERENT PIPING SYSTEMS

Sr. No.	Property/Parameter	Galvanized Iron	Copper	C-PVC	EONN PLAST PP-R

1.	Pipe Length	6M	5M	5M/3M	3M
2.	Type of Joint	Threaded	Soldering	Solvent Welding	Poly-fusion welding. For transition joints, fittings with threaded metal inserts (Brass with nickle plating) are also available.
3.	Effectiveness of Joint	Joint may leak	Joint may leak	Good but can open due to repeated hot and cold water cycles	Homogeneous, ensuring 100% leakproof joints.
4.	Installation	Tedious and time consuming	Time consuming & require skill	Less time required	Easy installation, save time & labour cost.
5.	Corrosion Resistance	Not resistant	Not resistant	Free from Corrosion	Free from Corrosion
6.	Chemical Resistance	Not resistant	Not resistant	Resistant	Excellent chemical resistant even at higher temperatures.
7.	Bore Smoothness	Rough. Less Flow	Smooth. Moderate Flow	Smooth Good Flow	Very Smooth. Very High Flow
8.	Scale Information	Very Common	Common	No Scaling	No Scaling
9.	Hygiene/Potability	Unhygienic due to scaling and encrustation of salts	Unhygienic due to scaling and Copper Sulphate	Unhygienic due to use of Solvent cement which is harmful to human health.	Total hygienic as there is no leaching of any chemical and jointing is also chemical free.
10.	Suitability in cold areas-sub-zero temperatures	Not suitable. Pipe bursts	Not suitable. Pipe bursts	Impact strength considerably reduces at lower temperatures and hence not suitable	Most suitable due to typical elastic nature and good impact strength
11.	Insulation requirements	Essential	Essential	Essential	Heat conductivity is low and hence much saving on insulation cost.
12.	Impact Strength	Excellent	Less	Less (brittle nature)	High impact strength
13.	Crack propogation	Slow	High	High	Very Low
14.	Life span under rated pressure & temperature	5-15 years	20-30 years	30-40 years	50 years +
15.	Behavior in fire	Resistant	Resistant but de-shapes or punctures	High percentage of chlorine and toxic gases are generated which is harmful	Melts like all other plastics, but no generation of any toxic gases.

Top

PPR PIPE DIMENSION DETAILS

Diameter	PN 10		PN 16		PN 20
	Wall Thickness	Internal Diameter	Wall Thickness	Internal Diameter	Wall Thickness	Internal Diameter
20	1.9	16.2	2.8	14.4	3.4	13.2
25	2.3	20.4	3.5	18.0	4.2	16.6
32	2.9	26.1	4.4	23.2	5.4	21.2
40	3.7	32.6	5.5	29.0	6.6	26.6
50	4.6	40.8	6.9	36.2	8.3	33.4
63	5.8	51.4	8.6	45.8	10.5	42.0
75	6.8	61.2	10.3	54.2	12.5	50.0
90	8.2	73.6	12.3	65.4	15.0	60.0
110	10.0	90.0	15.1	79.8	18.3	73.4
160	14.6	130.8	21.9	116.2	–	–

Top

OTHER RANGE OF EONN PRODUCTS

HDPE pipes from 32-315mm
MDPE pipes upto 315mm
PVC Casing 'n' Capings
PVC Cable Management System and Raceway